Weatherwash's POLYURETHANES  can be applied use either an atomized paint brush, paint sprayer or squeegee. 
​
​Polyurethanes are perfect for large surface application, like floors.
​
  • Clear, Satin Sheen
  • ​Clear, Flat


​BRUSH MATERIALS

  • Good quality synthetic brush or a stiff sponge brush (preferred) 
  • ​Do not thin.​​​​

BRUSH APPLICATION


​Preparation

Professional mix or stir Varnish for 60 seconds. Make sure to re-incorporate materials that may have settled to the bottom of the can.


BRUSH APPLICATION

Use a good quality brush or a sponge brush to apply varnish. Sponge brush is preferred

Apply Varnish in the direction of the wood grain (follow the stripes in the wood). 
  • Varnish is self leveling. 
  • ​Make sure to really cover and split ends and wood imperfections. 
  • Work in sections on large projects, keeping a wet edge as you move. 
  • Wet varnish may look slightly blue or purple, but will dry clear.


​DRY TIME

Allow the wood to dry between coats, dry time approx. 30 minutes.
​

RE-COAT

Apply 2-4 coats of polyurethane, for superior protection on any high-use areas in home, like table, cabinetry, millwork, floors, etc. 
​
Re-apply second coat within 2-4 hours of applying first coat or after 24 hours.

CLEAN UP

Easy soap and water clean up.

CURE TIME

Allow it to dry for 7-10 days before light use.
​Wait 30 days before full use. ​


​SPRAY MATERIALS

  • Gravity sprayer
  • Atomized Gun
  • ​Thin materials up to 10% with water

SPRAY GUN APPLICATION

​
​PREPARATION

Professional mix or stir Polyurethane for 60 seconds. Make sure to re-incorporate materials that may have settled to the bottom of the can.
Thin polyurethane up to 10% with water, prior using in a sprayer. Now product is suitable for spraying. ​
​

SPRAYER APPLICATION

Load diluted product into spray gun.
Apply using broad sweeping motion and overlapping streams. ​
  • Polyurethane is self leveling. 
  • Make sure to really cover and split ends and wood imperfections.​ ​
  • ​Work in sections on large projects, keeping a wet edge as you move. 
  • Wet varnish may look slightly blue or purple, but will dry clear.


​​
​DRY TIME

Allow the wood to dry between coats, dry time approx. 30 minutes.
​

​RE-COAT

Apply 2-4 coats of polyurethane, for superior protection on any high-use areas in home, like table, cabinetry, millwork, floors, etc. 
​
Re-apply second coat within 2-4 hours of applying first coat or after 24 hours.

​CLEAN UP

Clean your spray gun with denatured alcohol after use. Then run through water until it's clear. 

CURE TIME

Allow it to dry for 7-10 days before light use.
​Wait 30 days before full use. ​


​Care

Do not clean topcoat until the finish has cured completely. Polyurethane cure time guideline: 30 days. 

​After your finish has cured, clean items with warm water and lint free rag. If needed, add a small dot of dish soap or a dash of vinegar. As a fine finish care is important, be sure to use coasters, mats and trivets. Wipe spills immediately and only use a water damp microfiber cloth and mild dishsoap to clean.

​Avoid using any oil-soaps or silicone-based daily cleaners or sprays. These products and the chemicals in other cleaners can contaminate your finish and can prevent adhesion of future finishes. 

DOWNLOAD POLYURETHANE APPLICATION GUIDE

WEATHERWASH POLYURETHANE
File Size: 182 kb
File Type: pdf
Download File